dagger

Annotation Type Component

@Retention(value=RUNTIME)
 @Target(value=TYPE)
 @Documented
public @interface Component

Annotates an interface or abstract class for which a fully-formed, dependency-injected implementation is to be generated from a set of modules(). The generated class will have the name of the type annotated with @Component prepended with Dagger. For example, @Component interface MyComponent {...} will produce an implementation named DaggerMyComponent.

Component methods

Every type annotated with @Component must contain at least one abstract component method. Component methods may have any name, but must have signatures that conform to either provision or members-injection contracts.

Provision methods

Provision methods have no parameters and return an injected or provided type. Each method may have a Qualifier annotation as well. The following are all valid provision method declarations:

   SomeType getSomeType();
    Set<SomeType> getSomeTypes();
    @PortNumber int getPortNumber();
 

Provision methods, like typical injection sites, may use Provider or Lazy to more explicitly control provision requests. A Provider allows the user of the component to request provision any number of times by calling Provider.get(). A Lazy will only ever request a single provision, but will defer it until the first call to Lazy.get(). The following provision methods all request provision of the same type, but each implies different semantics:

   SomeType getSomeType();
    Provider<SomeType> getSomeTypeProvider();
    Lazy<SomeType> getLazySomeType();
 

Members-injection methods

Members-injection methods have a single parameter and inject dependencies into each of the Inject-annotated fields and methods of the passed instance. A members-injection method may be void or return its single parameter as a convenience for chaining. The following are all valid members-injection method declarations:

   void injectSomeType(SomeType someType);
   SomeType injectAndReturnSomeType(SomeType someType);
 

A method with no parameters that returns a MembersInjector is equivalent to a members injection method. Calling MembersInjector.injectMembers(T) on the returned object will perform the same work as a members injection method. For example:

    MembersInjector<SomeType> getSomeTypeMembersInjector();
 

A note about covariance

While a members-injection method for a type will accept instances of its subtypes, only Inject-annotated members of the parameter type and its supertypes will be injected; members of subtypes will not. For example, given the following types, only a and b will be injected into an instance of Child when it is passed to the members-injection method injectSelf(Self instance):

   class Parent {
      @Inject A a;
   }

   class Self extends Parent {
      @Inject B b;
   }

   class Child extends Self {
      @Inject C c;
   }
 

Instantiation

Component implementations are primarily instantiated via a generated builder or factory.

If a nested @Component.Builder or @Component.Factory type exists in the component, Dagger will generate an implementation of that type. If neither exists, Dagger will generate a builder type that has a method to set each of the modules() and component dependencies() named with the lower camel case version of the module or dependency type.

In either case, the Dagger-generated component type will have a static method, named either builder() or factory(), that returns a builder or factory instance.

Example of using a builder:

   public static void main(String[] args) {
     OtherComponent otherComponent = ...;
     MyComponent component = DaggerMyComponent.builder()
         // required because component dependencies must be set
         .otherComponent(otherComponent)
         // required because FlagsModule has constructor parameters
         .flagsModule(new FlagsModule(args))
         // may be elided because a no-args constructor is visible
         .myApplicationModule(new MyApplicationModule())
         .build();
   }
 

Example of using a factory:

 public static void main(String[] args) {
     OtherComponent otherComponent = ...;
     MyComponent component = DaggerMyComponent.factory()
         .create(otherComponent, new FlagsModule(args), new MyApplicationModule());
     // Note that all parameters to a factory method are required, even if one is for a module
     // that Dagger could instantiate. The only case where null is legal is for a
     // @BindsInstance @Nullable parameter.
   }
 

In the case that a component has no component dependencies and only no-arg modules, the generated component will also have a factory method create(). SomeComponent.create() and SomeComponent.builder().build() are both valid and equivalent.

Scope

Each Dagger component can be associated with a scope by annotating it with the scope annotation. The component implementation ensures that there is only one provision of each scoped binding per instance of the component. If the component declares a scope, it may only contain unscoped bindings or bindings of that scope anywhere in the graph. For example:

    @Singleton  @Component
   interface MyApplicationComponent {
     // this component can only inject types using unscoped or  @Singleton bindings
   }
 

In order to get the proper behavior associated with a scope annotation, it is the caller's responsibility to instantiate new component instances when appropriate. A Singleton component, for instance, should only be instantiated once per application, while a RequestScoped component should be instantiated once per request. Because components are self-contained implementations, exiting a scope is as simple as dropping all references to the component instance.

Component relationships

While there is much utility in isolated components with purely unscoped bindings, many applications will call for multiple components with multiple scopes to interact. Dagger provides two mechanisms for relating components.

Subcomponents

The simplest way to relate two components is by declaring a Subcomponent. A subcomponent behaves exactly like a component, but has its implementation generated within a parent component or subcomponent. That relationship allows the subcomponent implementation to inherit the entire binding graph from its parent when it is declared. For that reason, a subcomponent isn't evaluated for completeness until it is associated with a parent.

Subcomponents are declared by listing the class in the Module.subcomponents() attribute of one of the parent component's modules. This binds the Subcomponent.Builder or Subcomponent.Factory for that subcomponent within the parent component.

Subcomponents may also be declared via a factory method on a parent component or subcomponent. The method may have any name, but must return the subcomponent. The factory method's parameters may be any number of the subcomponent's modules, but must at least include those without visible no-arg constructors. The following is an example of a factory method that creates a request-scoped subcomponent from a singleton-scoped parent:

    @Singleton  @Component
   interface ApplicationComponent {
     // component methods...

     RequestComponent newRequestComponent(RequestModule requestModule);
   }
 

Component dependencies

While subcomponents are the simplest way to compose subgraphs of bindings, subcomponents are tightly coupled with the parents; they may use any binding defined by their ancestor component and subcomponents. As an alternative, components can use bindings only from another component interface by declaring a component dependency. When a type is used as a component dependency, each provision method on the dependency is bound as a provider. Note that only the bindings exposed as provision methods are available through component dependencies.

Since:

2.0

Optional Element Summary

Optional Elements

Modifier and Type	Optional Element and Description
java.lang.Class<?>[]	dependencies A list of types that are to be used as component dependencies.
java.lang.Class<?>[]	modules A list of classes annotated with Module whose bindings are used to generate the component implementation.

Element Detail

modules

public abstract java.lang.Class<?>[] modules

A list of classes annotated with Module whose bindings are used to generate the component implementation. Note that through the use of Module.includes() the full set of modules used to implement the component may include more modules that just those listed here.

Default:

{}

dependencies

public abstract java.lang.Class<?>[] dependencies

A list of types that are to be used as component dependencies.

Default:

{}